One need only watch routine flight operations to see the
triumphs and potential troubles of a graying Air Force fleet.
Aged fighters groan under the stress of six-G turns.
Vietnam-era transports rattle over primitive strips. Thirty-year-old bombers
shudder and shake on treetop runs to target.
Clearly, older airplanes still are capable of stellar
performance. Cracks and other old-age weaknesses, monitored by USAF's Aircraft
Structural Integrity Program (ASIP), are being held at bay.
But dangers are equally obvious.
With many planes beyond their planned service lives and some
flying in ways never intended, concerns about structural failure are
Moreover, ASIP workers are facing a fleet of 6,000 planes
whose average age, 15.8 years, is sure to rise. This trend, made inevitable by
years of slack plane production, will compel ASIP's inspectors to exercise even
That reality is clearly recognized by ASIP's corps of
inspection and analysis technicians, managed by Air Force Logistics Command,
headquartered at Wright-Patterson AFB, Ohio.
The problem—"tired" metal—is best explained by
analogy. Just as bending a paper clip back and forth creates microscopic cracks
that weaken it, so too does the stress of flying weaken aircraft parts.
Early discovery of weaknesses, whether to prevent disastrous
failure or to permit life-extending updates, is the essence of the
thirty-year-old mission that ASIP performs with mounting sophistication.
Once, says Bernie Nasal of AFLC's Materiel Management
Deputate, ASIP used a fairly primitive analytical model to predict when cracks
would appear. This approach was abandoned, he explains, when ASIP found
"big differences" between predicted failure times and when those
failures actually occurred.
Since 1970, ASIP has been pursuing a new two-track effort—based
on safety and long-term durability—that employs more extensive use of reliable,
hands-on inspection as well as advanced predictive models. The change has
proven to be a major success, if the record of aircraft longevity is any guide.
Still Going Strong
Hundreds of C-135 aircraft, the first of which was delivered
in 1955 with a projected service life of 10,000 flying hours, are still going
strong and are headed toward 36,000 hours. The fleet ofT-37B primary trainers
and T-38 advanced trainers, introduced three decades ago, is expected to stay
in service past the year 2000.
Long-range B-52 bombers—G models dating from 1958 and H
models from 1961—long ago passed their original service-life goals of 5,000
flying hours, and some will stay in action for another decade.
Twenty-five-year-old C-141 transport craft continue to provide a great chunk of
US long-range airlift. F-111 fighters produced between 1966 and 1976 and
F/FB-111 bombers produced between 1967 and 1970 will remain in USAF's inventory
well into the next decade.
The heart of the structural-integrity effort lies in ASIP's
Individual Aircraft Tracking Program, a systematic recording of flight
histories for all USAF aircraft, whether they be at the end of decades of
service or newly arrived on the flight line.
Even those in patently good health are treated like patients
in a hospital, with all vital signs monitored and scrutinized.
A multitude of specialized sensors, hooked to an aircraft
like emergency-room equipment hooked to a patient, produces information on such
invisible stress as deflection of metal between two points, while other devices
monitor and record factors such as airspeeds and G-force experience.
So important are the data to the prediction of structural
problems that ASIP has devised a wide variety of techniques to do the job:
• Counting accelerometers (used on smaller aircraft) record
each instance in which an aircraft exceeds certain gravitational limits.
• Mechanical strain recorders bolted onto all F-16A/B
fighters and a few T-38s and F-5s identify unusual structural movement between
two points by producing etchings on foil-like tapes.
• Vgh (aircraft speed, vertical acceleration, and height)
recorders, installed on ten percent of older F-4s and T-38s, record these
aspects of a flight.
• Multichannel recorders, sampling aircraft performance up
to 240 times per second, keep track of twenty-six individual flight parameters.
• Specialized monitors on large aircraft record fuel and
cargo weights and numbers of takeoffs and landings.
Useful for all planes, tracking is critical for air machines
flown in ways unforeseen by their designers. The B-52, to cite but one example,
has been transformed over the years from a high-altitude to a very-low altitude
machine. The change places unplanned-for stresses on critical components
throughout the bomber.
Hunting for Flaws
Careful recording of stressful operations to predict
structural damage is but one facet of ASIP's work. The accuracy of these types
of projections is vigorously tested—and at times disproven—by frequent, direct
examinations of actual aircraft components.
In such "Stress Spectra Surveys," carried out at
air logistics centers across the US, maintenance workers use a variety of ASIP
tools and techniques to hunt for unanticipated flaws.
Testing methods cover a wide spectrum. They might be as
simple as tapping a coin on an aircraft's surface to detect changes of tone or
using the naked eye to inspect fasteners. Most of the time, searches are more
One technique, known as the "eddy current,"
creates an electromagnetic field within a specified part; structural
imperfection shows up as a glaring deviation in the pattern of the field.
To detect damage hidden inside a component, ultrasound
devices are used in order to project sound waves through material, paint a
"picture" of the subsurface, and reveal voids and gaps in the part.
X rays, N rays, and other extremely-short-wavelength energy
forms can be radiated through a suspect part to detect advanced corrosion in
metallic fabrications, welds, and castings.
Then there is the so-called "magnetic rubber"
method. In this process, liquefied rubber, laced with metal filings, is applied
to a magnetized part. Attraction of the metal to a particular area indicates
the presence of a crack or fissure, one that might otherwise be too small to
see. Application of fluorescent penetrants, specialized liquids that glow under
black light, produces similar results.
Armed with detailed data yielded by the tracking and
inspection programs, analysts located at AFLC's Aircraft Structural Integrity
Management Information System begin the laborious task of reviewing the results
and putting them into usable form.
Delmar Teet manages the system, which is based at Oklahoma
City Air Logistics Center, Tinker AFB, Okla. He maintains that, after his
computers and analysts digest the raw data, they can provide logistics managers
with the kind of information they need both to determine the proper uses of
older aircraft and to prescribe future maintenance procedures to prolong the
Report summaries tell managers how a particular aircraft is
being used and, based on that record, how much damage the structure of the
aircraft may have received. That information is used to advise commands when
airplanes are reaching critical stress limits or when certain operations could
have dangerous consequences.
For an idea of the importance of this service, one need only
see the ages of some workhorse USAF aircraft. They average twenty-eight years
for all 262 B-52s, 17.9 years for all sixty-two F/FB-111s, fifteen years for
forty C-5As, 19.8 years for all 365 C-130s, and 17.9 years for all 949 F-4s.
Even among USAF's newer aircraft, there are pockets of age. Now at least nine
years old are 116 A-10s, twenty E-3 Airborne Warning and Control System
aircraft, and 298 F-15 fighters.
Equally useful is another product of AFLC's computerized
analyses: detailed advice on when, where, and how to modify older air vehicles
in order to maximize the number of flying hours the Air Force gets from its
Projections are made about how much longer certain
structures will last under certain flight conditions. With this information, USAF
officers can decide when to replace wings and other key structures on entire
fleets of aircraft. Such ASIP information has been used, for example, to plan
the orderly wing reskinning and reengining of the KC-135 aerial refueler,
rewinging and structural strengthening of the B-52, and wing modifications to
the C-141 airlifter.
USAF is not the only beneficiary.
Friendly nations flying US-built military aircraft—Turkey,
Greece, Norway, and Egypt, to name a few—also receive and use ASIP data.
Today, a structural integrity master plan is prepared for
each aircraft that enters the inventory. The plan undergoes continuous
refinement during an aircraft's service life. The first version of the master
plan is included in manufacturers' bid packages. From there, it is updated as
engineers develop durability and damage-tolerance analysis procedures.
Early production models are subjected to rigorous vibration,
flutter, durability, and damage-tolerance tests both on the ground and in the
air. These test data are compared against projections developed during the
design phase of the aircraft.
For ASIP workers, the crucial task for the last twenty years
has been to make certain that the aging aircraft on hand remain safe to fly and
ready to perform their mission. While the program has enjoyed remarkable
success, all signs are that there will be no early letup in the challenge.
The foregoing article
is based on reporting by Kenneth Perrotte, Chief of Media Relations at Air
Force Logistics Command headquarters, Wright-Patterson AFB, Ohio, and on
magazine staff reports.
See what senior leaders had to say at AFA's Air Warfare Symposium in Orlando, Fla.
Find out what senior Air Force and industry leaders had to say at AFA's Air Warfare Symposium.
AFA's Air Warfare Symposium kicked off Wednesday and runs through Friday. Follow Air Force Magazine's coverage of the show online and via social media by following us on Twitter,
Flickr, or by using
Tweets by @AirForceMag